Note: A Condon train inbound comes online from the shop and delivers offline to the shop. An outbound comes online from the Shop and goes outbound to the UP.
Pay attention to the OG (outbound) or OS (inbound) descriptors in the Train Info column.
The crew will call in and let you know if they are delivering or bringing on a PCC Condon Train. They have been known to say "bring in" or "bring on" in both scenarios so pay close attention to your trace car and the OG/OS indicators.
Either way you will log into PCC1 in WATSS and ALL trains will be inbounded 1st.
There is a PCC as well, this is NOT the correct road.
-----------------------------------------------------------------------------------------------------------------------------------------------
"INBOUND" OF THE PCC1
STEP 1: Select your Inbound icon.
STEP 2: Search your trace car and find your consist.
STEP 3: The inbound trains will show OS in the Train Info column. Make sure these are brought online to the SHOP track, but location doesn't matter. 100 Main is fine.
STEP 4: Send the crews a switch list at pcccondonteam@watco.com.
STEP 5: You will then deliver to these cars to the SHOP 2 hours after you brought them online.
Select all your cars and throw them in a switch. Select Consist. Fill out info for the SHOP.
MAKE SURE YOUR TIME IS 2 HOURS AFTER THE INITIAL INBOUND!
-----------------------------------------------------------------------------------------------------------------------------------------------
"OUTBOUND" OFF OF PCC1
STEP 1: Click inbound.
STEP 2: Search your trace car. Outbounds will start with OG indicator.
STEP 3: Select the correct consist and select 100 Main to bring them on from Road SHOP.
STEP 4: Go to track you brought cars on, select your cars and send a switch list to the crews pcccondonteam@watco.com .
STEP 5: Throw your cars into a switch list and select Consist. This is where it differs from the "inbound". You will deliver these cars off to the UP NOT the SHOP.
DO NOT send EDI.
