Watco

Processes you will need:

1. Log into Watss
2. On the top row, second from right, hit the equipment button:

1. Locate the track you are needing to resequence.  You can either scroll down to the track or use the drop downs provided:
2. Once you have located your track, highlight the car(s) that is needing resequenced by highlighting the car:
3. Next highlight the car that will be BEHIND the car you are resequencing.  In this case, you want LBR 551979 in front of GPLX 1345: 
4. Go to the bottom row of buttons, third from the right and hit the Reseq button: 
5. Your car will move on top of the car that you resequenced to: 
6. If you have more than one car, hold down your control key on and click the cars in the order that the final sequence will be:  
7. 
8. Next, still holding down your control key, highlight the position that you need the cars to move to:

       4. On the bottom row, third from the right, hit the Reseq button:     

       5. This will move the cars that you have selected, in the order that you selected, to above the car that you needed to                   them to resequence in front of: