Auto rack loading 

Tracks A & B are General Motors tracks

Tracks C, D, E & F are Chrysler tracks  

Note: the double tracks are the same as the single (E= EE & F=FF)


Step 1:


  1.  Once you receive the loading sheet, you will build a switch list based on the tracks the cars are in.
  2.  You will add the switch instructions that are written on the sheet next to your cars.
  3. Save it as a follow up ticket and be sure to add the switch list name (Example: DD-TRACK)



Step 2:     

  1.  They will send in another email later with the shipped load summary. It will show from Chrysler or General Motors, and you would look at the carrier to determine the RWC to load the cars.  
  2. Manual Load these cars. (L/E, apply RWC & L/E) 
  3. Once loaded, you will have to RE-add these switch instructions to the cars.


 

Make sure to take a snip of your cars so you can send it to the crews with a confirmation that these cars have been loaded.